1 Digital display dynamometer product features:
1.2.8-inch TFT true color display;
2. USB data interface, support hot plug;
3. The sensor is externally installed and equipped with various sensors to adapt to the force detection of various occasions.
4. Chinese / English version interface can be switched arbitrarily;
5. High sampling rate, arbitrarily set from 6HZ-1600HZ, can be used for impact force test.
6, built-in real-time clock, can display time and date;
7. The peak value, real-time value, and test process curve are displayed on the same screen, which can monitor and trace the entire test process;
8. The upper and lower limit deviation values can be set freely, and the alarms can be selected arbitrarily within and outside the limit;
9. Two-point level output at the upper and lower limits, buzzer, and display screen prompt alarm at the same time;
10. The capture process can be triggered by an external fixed point during the test process;
11. The screen display direction can be reversed by 180 °;
12, three units of N, kg, lb automatic conversion, can also be customized g, t, kN and other units;
13, with peak hold function, automatic peak release and free time setting;
14. 100 groups of test reports can be saved. The test report contains test time, peak value, valley value, average value, etc., and one group of curves can be saved to trace the entire process of testing.
15. Test the material strength by entering the material cross-sectional area;
16. Power saving functions such as automatic shutdown without operation, automatic backlight can be arbitrarily set;
17, through PC supporting special testing software, unlimited testing curve data can be stored, transferred, traced;
18. The test results can be printed in the software interface, and the data in EXCEL table format can be exported;
19. Various test machines can be configured to achieve various tests.