彩乐乐网

Products | Company | Purchasing | Tendering


Back to Product Center >
Did you find:

All products

3601 articles found

Plastic pellet machine

product information

-


    1 2 3 4 5 Total 100 pages of 3601 records

    Plastic pellet machine

    The extruder divides the machine head into a beveled machine head (with an included angle of 120o) and a right-angle machine head according to the angle between the head material flow direction and the centerline of the screw. The shell of the machine head is fixed to the fuselage with bolts. The die in the machine head has a core seat and is fixed to the wire inlet port of the head with a nut. The front of the core seat is equipped with the core, the core and the core seat. There is a hole in the center for passing the core wire; a pressure equalizing ring is installed at the front of the machine head to balance the pressure; the extrusion molding part is composed of a die sleeve and a die sleeve; the position of the die sleeve can be adjusted by the bolt through the support In order to adjust the relative position of the mold sleeve to the core, it is easy to adjust the uniformity of the thickness of the extrusion cladding. The head is equipped with a heating device and a temperature measuring device. 1Basic information The main machine of the plastic granulator is an extruder, which consists of an extrusion system, a transmission system and heating. Details >>
    Plastic pellet machine

    Back to 彩乐乐网