Large-diameter PE pipe crusher manufacturers are suitable for the crushing and granulation of injection gates of engineering plastic waste, pipes, and defective products.
Features of large diameter PE pipe crusher manufacturers :
Adopting sound insulation device, low noise; the power is detachable, and the sharpening blade can be removed separately after being blunt; suitable for crushing various soft and hard and foam plastics
1. Before starting, the driving wheel should be moved by humans one or two times. After confirming that the movement is flexible, you can start the machine. Wait until the crusher runs normally before feeding.
2. Before stopping the operation, stop feeding and drain the material from the machine before cutting off the power to the motor.
3. Pay attention to the temperature of the bearing during operation to ensure that the bearing is in a good lubrication state, and pay attention to whether there is any abnormality in sound and vibration. When abnormal conditions are found, the vehicle should be stopped to check whether it is jammed by non-fragile objects, or whether the parts are damaged.
4. Keep the crusher's feeding uniform and prevent overload. Prevent metal, wood and other unbreakable objects from falling into the machine. When it cannot be broken, the feed moisture cannot be too high; when it is wet-crushed, it is necessary to maintain an appropriate amount of water to prevent clogging due to insufficient flushing and reduce production capacity.
5. Check whether the particle size of the crushed product meets the requirements. If there are too many particles exceeding the specified size, the cause should be found out (such as the screen gap is too large, the discharge opening is too wide, and the hammer is worn, etc.), and appropriate measures should be taken to eliminate it.
螺栓 是否牢固，易磨损部位的磨损程度如何。 6. When the crusher stops, check whether the fastening bolts are firm and how easy the abrasion parts are. For tooth crushers, the parking machine should also be used to remove the wood trapped between the teeth.
7. Worn parts should be replaced or repaired in time.
8. The safety device of the crusher should be kept in good condition, and the safety device must not be invalidated for the sake of saving trouble.
When contacting me, please indicate that you saw it on the plastic machinery website , thank you
Other products of this merchant
Abstract: Supply of plastic chemical fiber granulator [detailed]Automatic plastic feeding machine
Abstract: plastic automatic feeding machine [detailed]Cooling Mixer Promotion
Abstract: Promotion of cooling mixer [detailed]Supply of high quality round shaker
Abstract: Supply of high quality round vibrating screen [detailed]High-quality magnetic frame
Abstract: High-quality magnetic frame [detailed]Direct single coil winder
Summary: Direct-winding single-winder winder [detailed]High-quality production shaker
Abstract: high-quality production shaker [detailed]High quality PE pipe crusher
Abstract: High-quality PE pipe crusher [detailed]
Plastic Machinery Net-The professional online media for the plastic machinery industryAbout Us | Corporate Website | Site Services | Member Services | Advertising Services | Search Engine Promotion | Owned Website | Friend Links |
Copyright 2020 siamtlr.com All Rights Reserved Legal Advisor: Lawyer Jia Ximing of Zhejiang Jiangze Law Firm