彩乐乐网

Qingdao Xincheng Yiming Rubber Machinery Co., Ltd.

Rubber vacuum injection machine, rubber injection molding machine, rubber open rubber mill, rubber breaker

Plastic Machinery Network

contact number

13589264130

9

product search:

Rapid hot press forming machine

Vacuum forming machine

Rubber injection molding machine

Rubber curing machine series

Rubber injection molding machine

Rubber mixer series

Rubber calender

Cutting machine series

Plastic crusher

Louver

Oblique section machine

Cutting machine

Jaw plate vulcanizing machine

EVA foam molding machine and related machinery

Waste tire decomposition processing equipment

Four-column hydraulic press

Conveyor repairing machine

Rubber slitting and cutting machine

Rubber extruder and rubber filter

Tire curing machine

Rubber and plastic products production line

Recycled rubber production equipment

Special equipment for rubber floor tiles

Film cooler

contact details
Address: Huangshan Economic Zone, Jiaonan City, Qingdao, Shandong
Postcode: 266424
Contact: Ma Yunhua Telephone: 0532-83122597
Fax: 0532-83122597
Mobile: 13589264130
After sales phone: 13589264130
Message: Send message
Personalization: www.532xcym.com
Mobile Station: m.532xcym.com
Website: www.532xcym.com
Shop: http://siamtlr.com/st1695/
Your present location: 彩乐乐网 > Technical Articles > Daily Maintenance of Rubber Injection Machine QQ chat
technical article

Routine maintenance of rubber injection machine

Click times: 1404 Release time: 2019/11/8

Check matters regularly.

1. Daily inspection items:

A. Check if the emergency stop button is normal;

B. Check the temperature of the upper and lower electric heating plates, the temperature of the hot kerosene, and the temperature of the feeding barrel and the shooting barrel;

C. Check whether the pressure of the hydraulic system is too high or too low;

D: Check whether the mold installation is stable;

E: Keep the machine and its surroundings clean and free of debris.

2. Check items every week:

A Check whether the limiter (induction switch, electronic ruler, etc.) and the limit block are loose;

B: Check whether there is oil leakage in each part of the machine, trace the cause of oil leakage and replace the sealing elements accordingly.

C: Clean the air filter, etc. on the vacuum pump as appropriate.

3. Monthly inspection items:

In addition to checking the above, you also need to check:

A: Check the electrical components and whether the wiring is loose;

B: Check whether the hydraulic oil is contaminated or wet, and whether the suction filter needs to be cleaned;

C: Specific pressure or specific pressure control, please check the linear proportion of pressure and flow, and readjust if necessary;

D: Whether each grease lubrication part needs to be filled with new grease, etc.

4. Annual inspection items:

In addition to checking the above, you also need to check:

A: Check whether the hydraulic oil needs to be replaced with new hydraulic oil;

B: Check if the wire is aging, hardened and replaced;

C: Check whether noise occurs when the feed motor is running.If the bearing is broken, the bearing needs to be replaced.

Maintenance supplies and replacement standards.

Consumables

life

Hydraulic oil

年或 1 萬小時 左右 1 year or 10,000 hours

spring

5 次左右 10 5 times

Hot kerosene

About half a year

Master cylinder oil seal

About two years

Cylinder oil seals other than the master cylinder

年半左右 1 and a half years

Vacuum pump lubricant

Times

左右 Around 300h

Every time after

左右 Around 500h

Vacuum pump oil separator

小時或背壓 >0.7Bar 左右 2000 hours or back pressure > 0.7Bar

Filter element of vacuum pump air filter

左右 Around 1 year

Filter element in vacuum pump gas ballast valve

左右 Around 1 year

[ Print ] [ Back to Top ] [ Close ]

| Shop 彩乐乐网 | Company Profile | Products | Latest Supply | Company News | Inquiry Message | Contact Us | Member Management |
Design and production of plastic machinery nets, ripping without permission will be investigated. Copyright (C) http://siamtlr.com , All rights reserved.
The above information is provided by the enterprise itself, and the authenticity, accuracy and legality of the information content are the responsibility of the relevant enterprise. Plastic Machinery Network does not assume any responsibility for this.
Tips: In order to avoid purchasing risks, it is recommended that you confirm the supplier's qualification and product quality before purchasing the product.
QR code online chating

Scan to visit mobile station