Seven main features of the vertical mill
Zhangjiagang Huajie Machinery Factory. Our factory has been manufacturing plastic mills for many years. It fully absorbs advanced technology and management methods at home and abroad. The newly developed SMW-500 high-speed turbine-type and disc-type plastic mill is plastic The product factory cuts costs and cuts costs, and solves the accumulation of waste products. We take "products and perfect services" as our purpose. Continuously provide users with the * plastic mill series products throughout the country. And according to user needs to provide a series of plastic products, industrial vacuum cleaners, centrifuges products.
* The point is that the vertical mill equipment is easy to maintain. Through overhauling the oil cylinder, turning the boom, changing the roller sleeve and the liner is convenient and quick, reducing the downtime loss.
The second point is the environmental protection of vertical mill equipment. The vibration is small, the noise is low, and the equipment is completely sealed. The system works under negative pressure, no dust spills, and the environment is clean, which meets national environmental protection requirements.
The third point is the strong drying capacity of vertical mill equipment. Because the hot air is in direct contact with the materials in the mill, the drying ability is strong and energy is saved. By adjusting the temperature of the hot air, it can meet the requirements of materials with different humidity.
The fourth point is that the vertical mill equipment is easy to operate and reliable. Equipped with an automatic control system for remote control and easy operation. Equipped with a device to prevent direct contact between the roller sleeve and the disc liner, avoiding destructive impact and severe vibration.
The fifth point is that the quality of the vertical mill equipment is stable. Because the material stays in the mill for a short time, it is easy to detect and control the product particle size and chemical composition, reduce repeated milling, and stabilize product quality.
The sixth point is the low investment cost of vertical mill equipment. Because it integrates crushing, drying, grinding, and grading and conveying into one, the system is simple, the layout is compact, the floor area is about 50% of the ball milling system, and it can be arranged in the open air, which can greatly reduce investment costs.
The seventh point is that the operation cost of the vertical mill equipment is low. High grinding efficiency: The grinding roller is used to directly crush the ground material on the grinding disc, which has low energy consumption and saves 30% to 40% of energy compared with the ball milling system. Less wear: Because the grinding roller does not directly contact the grinding disc during work, and the grinding roller and the liner are made of materials, it has a long service life and less wear.