彩乐乐网

Zhangjiagang Huade Machinery Technology Co., Ltd.

Main Products: pp silicon core pipe extruder production line, mpp power pipe top pipe extruder production line, pe coil pipe drainage pipe water supply pipe extruder production line, ppr hot and cold water pipe plastic pipe extrusion line, pvc power pipe Extruder production line

7

contact number

18751156702

Your present location: Zhangjiagang Huade Machinery Technology Co., Ltd. > Mixer Unit > 500/1000 Mixer Unit > 500/1000 Frequency Conversion Powder High Speed Mixer

company information

Contact:
Cai Lulu
Phone:
18751156702
Phone:
18751156702
Fax:
18751156702
Address:
East of Tuanjie Bridge, Leyu Town, Zhangjiagang City (South of Lejiang Road)
Postcode:
215600
Personalization:
www.huadjx.com
Mobile Station:
m.huadjx.com
URL:
www.huadjx.com/
Shop:
http://www.siamtlr.com/st21540/
Leave him a message
500/1000 Inverter Powder High Speed Mixer View similar products >>
Inverter powder high speed mixer
price Negotiable
  • 500/1000 Model 500/1000
  • Brand
  • 生产商 Manufacturer nature
  • 苏州市 Location Suzhou City

Updated: 2019-12-12 10:39:02 Views: 981

When you contact us, please indicate that the information you see on Plastic Machinery Online, thank you!

【a brief introdction】
The base of the variable frequency powder high-speed mixer is cast iron, which has a large weight, good stability when the machine is running, and a longer life. Now most manufacturers use welded square steel as a base to save costs, and some even inject it into the square steel. To increase the weight of the base, such as cement, this method can only reduce the cost. It does not have any benefit to the product. When the machine is running, it will experience instability, noise, paddle wear, etc., and the life of the machine will be greatly reduced.
【Detailed description】


   产品优势 Product advantages of inverter powder high speed mixer

底座全部采用铸铁铸造,重量大、机器运行时稳定性好、寿命更长,现在大多数厂家为了节省成本,大多采用焊接方钢作为底座,有的甚至在方钢内灌入水泥等以提高底座重量,这样的做法只能减少成本,对产品本身没有任何好处,机器运行时会出现不稳定、噪音大,桨叶磨损块等现象,机器的寿命也会大大降低 1. The base is made of cast iron, which has a large weight, good stability when the machine is running, and a longer life. Now most manufacturers use welded square steel as the base to save costs, and some even pour cement into the square steel. Increasing the weight of the base can only reduce the cost. There is no benefit to the product itself. When the machine is running, there will be instability, noise, paddle wear and other phenomena, and the life of the machine will be greatly reduced .

2, the pot body is made of stainless steel, the inner surface is extremely smooth and hard, with abrasion resistance, corrosion resistance, not easy to stick materials and so on. The mixer's pot body has a heating jacket and a resistance heating coil. The temperature of the material in the pot can be controlled by adjusting the temperature by transmitting the high-burning point heat-conducting oil in the heating jacket to the pot body. The jacket has an asbestos insulation layer.

3. The mixer lid is cast from aluminum alloy. The inner surface is polished. After it is lifted by the cylinder, it can rotate in the vertical direction and rotate clockwise horizontally (rotate 70 ° C). The cover is provided with holes for adding resin, plasticizer, stabilizer and ventilation holes. Users can arrange according to their own . Do not use excessive force to rotate the lid to prevent injury to the wall. In order to prevent the lid from being properly covered and the mixing slurry turning to cause personal accidents, a motor protection is provided.

变频粉末高速混合机导流板是用于加强混合效果的。 4. Frequency converter powder high speed mixer deflector is used to enhance the mixing effect. The deflector has an approximately streamlined surface. The deflector affects the circulating flow of the material. Its favorable position depends on the materials to be mixed. The deflection angle of the deflector in the pot can be adjusted freely and can be adjusted vertically. The external clamping device fixes the deflector angle. The thermocouple is assembled in the deflector. Its connection is drawn out through the conduit to the terminal head and connected to the thermometer of the electric control box. The temperature of the material can be read out on the indicator for feedback control. Unloading.



Product comparison QR code online chating

Scan to visit mobile phone shops
Leave message