PET plastic recycling granulation production line
PET plastic recycling generally refers to the use of PET bottles, after crushing, washing, drying, warming plasticizing, drawing, cooling, granulation, processing, to produce pellets of PET for re-production of PET related products , Especially as the amount of chemical fiber textile raw materials. As PET bottles are widely used in beverages and tableware, and due to hygiene and other reasons, they can only be used once. Therefore, the equipment for recycling PET bottles has always been of concern. PET plastic bottle flakes washing, crushing and granulating production line Generally, the bottle caps, bottle drags, labels, etc. separated on PET bottles are PE, which can also be processed for recycling and granulation (using DY waste plastic recycling granulator for PP, PE, ABS, etc.) . The recycling of various waste plastics has attracted wide attention. Generally speaking, plastic crushers are common. Other equipment is the same as PET recycling equipment. The configuration of recycling equipment is different. The quality of the recovered plastic is also different. The key is cleaning and manufacturing. How good the grains are.
PET plastic recycling and granulation production line is mainly used for PET bottle crushing, cleaning and granulation to realize automatic separation of bottle caps and labels. Polyester plastics are often bottles and pots. Such as mineral water, cola bottles, oil cans, etc. Because of its good transparency, it is very popular in the food industry, but discarded items are also more complicated because of the loaded items. Therefore, many people worry about cleaning in the regeneration process. Based on repeated experiments and exploration for more than ten years, our factory has successfully developed a set of cleaning equipment. PET bottle chip crushing and washing equipment integrates crushing, washing and drying. The equipment has a simple and elegant appearance and strong applicability. It can crush and clean mineral water bottles, cola bottles and other bottle materials. After crushing, washing, drying, warming and plasticizing, After drawing, cooling, granulating, and processing, they can be directly used as recycled materials. This equipment has the characteristics of low power consumption, high quality of finished products, and low cost.