Nine precautions for correct maintenance of automatic feeder
1. During the operation of the equipment, it is strictly forbidden to observe the operation of the equipment and open the relevant inspection port for maintenance. If it is really necessary to observe the operating conditions of the relevant components during operation, professionals need to operate in accordance with regulations and be equipped with necessary personal protective measures.
2. During inspection, repair and maintenance, the staff must ensure that the main power switch is disconnected and the main power switch is closed, otherwise serious injury may be caused.
3. The installation, repair or maintenance of electrical equipment related to this equipment needs to be operated by professional electric operators in accordance with regulations, otherwise serious injury accidents may be caused.
4. The protective part of the equipment is an important part of the equipment. It cannot be removed at will. If damage occurs, it should be repaired or replaced in time.
5. The head and tail are equipped with two limit switches. The track wheel of the material cart will stop running when it touches any limit switch. Should be checked regularly whether the travel switch is sensitive, if it fails, it should be replaced in time, otherwise it is easy to pull the material cart, and even lead to more serious consequences.
6. An electric shock line is provided at the lower part of the egg roll to prevent the chicken from pecking eggs. Please do not touch it with your hand to avoid being injured.
7, the power supply part of the power cord needs a special protective cover, the wiring part must have a special terminal block to prevent leakage caused by accidents.
8. Use or maintenance operators must undergo professional skills training and operate strictly in accordance with relevant operating procedures.
9. The equipment has related safety operation warnings. Please pay attention to and read them carefully when using or maintaining.
Understand the matters that should be paid attention to when overhauling, then we should pay attention to the matters that should be paid attention to when using
1. When the feeder is running, don't put anything on it. In that case, it will easily lead to excessive pressure on the motor and burn out the motor.
2. Check whether the belt is intact and loose. The feeder is used to transfer materials by the leather belt. Only when the belt is normal can the production performance of the machine be fully exerted and the workload can be maximized.
3.Because the gears and chains are controlled and connected between the various parts of the feeder, the gears and chains must be guaranteed the maximum degree of lubrication, so as not to damage the machine due to lack of lubrication.
4. Due to the large amount of dust generated during the production of feed, a large amount of dust will accumulate in the control box of the feeder. The dust will short-circuit the internal circuits and damage electrical circuits and other components. Take a look at the dust in the control box.
5. The main power of the feeder is the motor. The motor has a power motor and a reduction motor (because the speed of the motor is very high, a reduction motor is used to reduce the speed when transmitting power). When using, check the power motor and geared motor for any abnormalities. The motor should be properly maintained, such as adding gear oil to the gear of the reducer.