彩乐乐网

Hello, welcome to Plastic Machinery Network

10

13905809167

Wang Jiaming (Manager)

Phone:
0580-8231369
Phone:
13905809167
When contacting me,
Informed from Plastic Machinery Network
Fax:
0580-8233517
Personalization:
www.zsfxlg.com
Shop URL:
http://siamtlr.com/st4107/
Company Website:
www.zsfxlg.com

Extrusion system of plastic granulator

Read: 2922 Published: 9/5/2013

Plastic granulator The screw of the plastic granulator is the main component of the extruder. It is directly related to the application range and production efficiency of the extruder. It is made of high-strength and corrosion-resistant alloy steel. The speed of the plastic pelletizer screw directly determines the amount of rubber and the speed of extrusion. In normal production, it is always desirable to achieve as high a speed as possible to achieve high output.

In addition to the screw but also the barrel, which has an important impact on the plasticization of materials, product quality and production efficiency.

The plastic granulator barrel is a metal seamless tube, which is generally made of alloy steel or composite steel pipe lined with alloy steel that is heat-resistant, high compressive strength, strong, wear-resistant and corrosion-resistant.

The barrel cooperates with the screw to achieve the crushing, softening, melting, plasticizing, venting and compacting of the plastic, and continuously and uniformly conveys the rubber to the molding system. The length of the general barrel is 18: 1 of its diameter. The principle is to make the plastic fully heated and plasticized.

If the two components of the screw and barrel are severely worn, they will definitely affect the output of the extruder. Of course, when the machine is working, the screw rotates in the barrel, the friction between the material and the two, and the working surface of the screw and barrel will gradually wear. If the material is not plasticized uniformly, or metal foreign matter is mixed into the material, the torque of the screw is suddenly increased, and this torque exceeds the strength limit of the screw, causing the screw to break. So pay attention to these when using the machine.

The main machine of the plastic granulator is an extruder, which is composed of an extrusion system, a transmission system and a heating and cooling system. The above-mentioned screw and barrel belong to the components of the extrusion system. The extrusion system also includes a hopper, a head, and a die. The plastic is plasticized into a uniform melt through the extrusion system, and in this process The extruder head is continuously extruded by the screw under the established pressure.

Zhoushan Jiaming Machinery Co., Ltd. Main Products: Zhoushan Screw, Rubber Extruder Screw Barrel, Injection Mold Screw Barrel Address: No. 24 Dafeng Road, Xiqiao Industrial Zone, Jintang Town, Dinghai District, Zhoushan City, Zhejiang Province 0580-8231369 Mobile: 13905809167 Fax: 0580-8233517
Design and production of plastic machinery nets, ripping without permission will be investigated. Copyright (C) http://siamtlr.com , All rights reserved.

The above information is provided by the enterprise itself, and the authenticity, accuracy and legality of the information content are the responsibility of the relevant enterprise. Plastic Machinery Network does not assume any responsibility for this.
Tips: In order to avoid purchasing risks, it is recommended that you confirm the supplier's qualification and product quality before purchasing the product.

Leave message
Product comparison QR code online chating

Scan to visit mobile phone shops
Leave message