FR-600L Pneumatic Sealing Machine The handle of this product adopts a three-proof rubber handle, which is light and beautiful. This machine is based on advanced technology at home and abroad, uses high-quality materials, is equipped with a miniature low-speed permanent magnet synchronous motor, a small silent chain, a pocket temperature control switch and a temperature indicator device. Reasonable and easy to adjust. The machine is light in weight and small in size, and can be carried with it; low noise, high efficiency, wide adaptability, simple operation and convenience. Suitable for export of native animal products packaging, cultural relics storage, scientific research departments, food, daily chemical industry, factory shops and other industries.
FR-600L pneumatic sealing machine features:
1. This machine is mainly used to heat-seal composite film material packaging bags with polyolefin (such as polyethylene, polypropylene, etc.) as the inner layer.
2. The thickness of the film, the width of the seal can be applied within the specified range, and it can achieve a uniform linear seal.
3. No matter big bag, small bag, long bag, short bag can be continuous straight line sealing, to obtain satisfactory results.
4. Equipped with clamps, which can be installed on any side cover of the machine, and the angular position can be adjusted to suit the convenience of operation.
Cleaning and maintenance:
Regularly clean the surface of the machine, the bottom plate and the lower mold slide, the groove, the upper mold inner pressure plate and the positioning rod (note: the power must be turned off and the room temperature must be restored).
The lower die slide, pressure rod bearing, eccentric wheel, guide post, guide rail and other transmission parts are regularly filled with butter to ensure the performance of the machine.
How to clean the tooth knife: first plug the two drain holes of the lower mold with a cotton ball, pour boiling water into the groove of the lower mold until it is full, and then push the lower mold slide into place, press the upper mold down, press To the lowest point, let the knife soak for several minutes until cleaning, and repeat several times.
Safety measures of vacuum packaging machine
1. Keep the machine's environment clean and tidy, and the environment should not be excessively humid.
2. Do not use this product in flammable, explosive and other harsh environments.
3. Three-phase four-wire machines should be equipped with the same type of sockets that match the power supply of the machine and should meet the three-phase four-wire power requirements; single-phase machines should be equipped with three-pole power sockets and ensure that the machine is reliably grounded.
4. Unplug the power plug when servicing the machine to prevent electric shock.
5. Keep the vacuum chamber part in a clean state, and regularly wipe the inside of the machine. The oil of the vacuum pump can only be added to two-thirds of the vacuum pump oil window. It should be used and maintained strictly in accordance with the vacuum pump instruction manual.
Tips: In order to avoid purchasing risks, it is recommended that you confirm the supplier's qualification and product quality before purchasing the product.