The ball valve is a ball with a circular channel as the opening and closing member, and the ball rotates with the valve stem to realize the opening and closing action of the valve. The opening and closing part of the ball valve is a ball with a hole, which is selected around the axis perpendicular to the channel, so as to achieve the purpose of opening and closing the channel. The ball valve mainly provides the opening and closing of pipes and equipment media.
Products of Germany LIT Ball Valve:
Flange ball valve, high pressure ball valve, high temperature ball valve, stainless steel ball valve, internal thread ball valve, pneumatic ball valve, electric ball valve, steam ball valve, cast steel ball valve, cast iron ball valve, high temperature ball valve, etc.
Ball valve is a common valve with excellent performance, which can be widely used in life and work, especially the imported ball valve with stable performance has better use value. However, even if the imported ball valve has a guaranteed quality, it is necessary to pay attention to the following points if you want to extend its service life better:
1.Ensure normal working conditions
If the imported ball valve has a longer life, it must be used in daily use, and it must meet its normal working conditions, that is, to ensure that it is at a harmonious temperature and pressure ratio, and to ensure the reasonableness of the corrosion data. It is the basic condition to ensure that the life of imported ball valves can be extended.
2. Reasonable and correct operations are also required before routine maintenance and repair
The operation of such imported ball valves requires correct and reasonable operations under the guidance of professionals, in accordance with similar instructions or the requirements of technical staff. It should be noted that although the ball valve is closed, its content will not be subject to fluid pressure. Therefore, it is necessary to be careful in operation, maintenance and repair. It must be clear after the pressure has been removed from the upstream and downstream pipelines of the ball valve. Only then can it be disassembled. This is an important point that needs attention when repairing and disassembling imported ball valves.
3.Appropriate cleaning and grease lubrication
If the imported ball valve is to be disassembled and cleaned, it also needs to be operated by professionals, and special tools are also needed to operate it. The bolts on the flange of the ball valve must be symmetrical and tightened gradually and evenly. The rubber parts and plastic parts, metal parts, and working medium should be fused with each other. For the individual parts of the imported ball valve, you can use the dip cleaning method. For non-metal parts, do not immerse them in the cleaning agent for too long. After cleaning, some grease is needed to lubricate.
In general, users want to extend the life of imported ball valves to a greater extent. They only need to operate according to the three points described above. However, in order to ensure that the ball valve purchased by the dog has a long service life as soon as possible, it is still necessary to choose imported ball valves with guaranteed quality, so as to reduce as much as possible the labor and capital costs of maintenance and repair.
The advantage of Germany LIT ball valve is that each ball valve has undergone rigorous pressure test, and it leaves the factory without leakage and normal operation. Germany Litt ball valve water supply system, steam system, gas system, high temperature system are widely used.