The pipe crusher is used to crush PVC pipe, PE pipe, PP pipe, ABS pipe, PVC pipe, PS pipe. After the raw materials pass through the 30 degree hopper, they will automatically enter the crushing chamber for crushing. The pellets will eventually flow out through the screen to complete the process. High, as one of the wearing parts of the equipment, the screen is a conventional accessory often used in the tube crusher. Then how should we replace it when the accessory wears out and reaches the scrap requirements during use?
1. Lay the screen of the pipe crusher on the lower ring, and then use the tight ring to stretch the net on the lower ring. Be careful not to pull the net too tight, and it will be flat.
2. Press the lower screen ring together with the special screen of the classification screen to the upper screen ring with bolts. Pay attention to the bolts to be symmetrical and tightly pressed.
3. After that, lock the screen body on the press ring. At the same time, when selecting the screen, we must choose a screen with a thick wire diameter and a standard hole diameter. In addition, we must grasp the tightness of the screen when installing it. Too loose or too tight will damage the crusher.
The size of the screen is selected to achieve the thickness of the crushed particles, and screens with different apertures can be equipped. The replacement of the screen will not be complicated. Simply put, firstly, you should choose a screen mesh that requires a combination of apertures and thicknesses. Second, use a wrench to unscrew the bolts of the machine cavity. The screen is pulled out. After the scrapped mesh is pulled out, insert the new mesh into the bottom bracket of the machine in the opposite direction of the removal of the mesh and then fasten the platen to complete the replacement. Users only need to change a few times to be proficient.