Runma 1000-1300 series traversing robot arms are suitable for all types of horizontal injection molding machines. The product range is from 250 to 650 tons, which is suitable for products and gate housings. Single-stage or telescopic vertical arm with product arm and swing arm for two- or three-plate mold product removal. The X, Y, and Z axes are driven by AC servo motors, which can realize the product stacking at any point inside the mold, and the X, Y, and Z directions can be driven by scissors and embedded or embedded in the cutting channel cylinder attachment. Model ABC d EFGHIJK LRQ-1000WD (S3, S5) 1430 500 1630 175 195 210 200 1050 440 1700 2500 RQ-1200WD (S3, S5) 1550 1740 Model suitable for injection molding machine (ton) Stroke (mm) Side angle (degrees) Maximum load (including fixture) Time (seconds) Drive mode Working pressure (kgf / cm2) Air consumption (nl / cycle) Power Power consumption NW (kg) Pull up and down Cross travelling Takeaway short cycle RQ-1000WD (S3, S5) 250-450 1000 220-1050 1750 90 5 2 11 x, y, z AC servo motors 5-7 8 AC220 ± 10V 50 / 60HZ 4.2 250RQ-1200WD (S3, S5) 420-650 1200 220-1050 1750 2.2 260
Tips: In order to avoid purchasing risks, it is recommended that you confirm the supplier's qualification and product quality before purchasing the product.