Jiangsu Hilti General Agent
碳纤维胶 植筋胶销售代理碳纤维加固处理要求 级碳纤维胶批发 ，购买我司材料提供加固资质。 Huiyu Carbon Fiber Rubber Planting Rubber Sales Agent Carbon Fiber Reinforcement Requires Wholesale Carbon Fiber Reinforced Rubber . Buy our materials to provide reinforcement qualification. 基材：混凝土、天然硬质石材外观：的软箔包装+注射系统 ， 产品使用专用的注射，两组分在可更换的静态混合器中充分混合直接注入钻孔内。 Carbon fiber cloth construction manufacturer, substrate: concrete, natural hard stone Appearance: soft foil packaging + injection system , the product uses a special injection, the two components are fully mixed in a replaceable static mixer and directly injected into the borehole. 植筋胶 销售进口 植筋胶 得植筋胶施工步骤： 1使用喜利得TE-76电钻系统钻孔2使用刷子及吹气筒清孔，至少三次以上3用喜利得MD2500专用注射胶灌胶，前三胶水必须废弃不用4从孔内底部开始注胶，达孔深的23左右5按顺时针方向缓缓旋入钢筋，确保到达孔底* 植筋胶 质量保证，价格优惠，无惧恶劣环境表现始终如一基材混凝土、天然硬质石材外观的软箔包装+注射系统，材质双酚A改性环氧树脂用途:混凝土结构植筋加固，特别是重要，悬挑构件，承重动力作用的结构，构件等；重型荷载 The strong and stable bonding force is evenly distributed along the anchoring depth, and the anchoring effect is like the embedded structure; the installation is not affected by the harsh environment, and the design force value can be fully exerted in the wet and smooth holes. The rhinestone drilling does not require chiseling. It can be installed in the clear water environment; · Our company specializes in producing carbon fiber cloth and various building structure adhesive series, and the company with professional qualification for reinforcement, acting as the agent for the sales of imported plant glue to obtain plant glue. Construction steps: 1 use Hilti TE-76 electric drill system drilling holes 2 Use a brush and a blower to clear the hole, at least three times. 3 Use Hilti MD2500 special injection glue to fill the glue. The first three glues must be discarded. Around 23 of 5 slowly screw in the steel bar clockwise to ensure that it reaches the bottom of the hole. * Reinforcing rubber quality assurance, good price, no fear of harsh environment, consistent performance, consistent appearance, flexible foil packaging + natural hard stone appearance + injection System, material bisphenol A modified epoxy resin Application: Reinforcement of concrete structures, especially important, cantilevered members, load-bearing dynamic structures, members, etc .; heavy loads Fixed, such as beams, columns, machinery, equipment, etc .; chemical post-anchor applications in harsh environments, such as installation in wet, bright water, high and low temperature environments and smooth holes; especially for large diameter and buried depth (such as overlap) planting tendons And fastening; any heavy load application that requires extensive test reports.
Jiangsu Hilti General Agent
Characteristics: Strong and stable bonding force is evenly distributed along the anchoring depth, the anchoring effect is like the embedded structure; the installation is not affected by the harsh environment, and the design force value can be fully exerted in the wet and smooth holes. The rhinestone drilling does not require chiseling It can be installed in clear water environment; Wide temperature adaption range, after installation, it can bear the ambient temperature of -50 ℃ to + 80 ℃; no expansion stress anchoring, suitable for small margins and small distances; benzene free Ethylene and, no odor, meet the requirements of non-toxic environmental protection, can be used for drinking water equipment installation after curing; * soft foil packaging, less material loss; special double spiral mixing nozzle, guaranteed mixing ratio, professional supporting construction tools, Ensure standard construction; National Standard Concrete Structure Reinforcement Design Code gb50367-2006 certified qualified A-grade adhesive and the code editing unit; long-term performance obtained China, Switzerland, Japan, the United States and France and other national authority certification; complete fire-resistant design data , To f2404 hours); Root and double-sided welding tests are qualified; Advanced bar and anchor design software (exbarp.554rofis) and full Engineering services
间 Initial setting time
间 Curing time
（ ℃ ） -5 ( ℃ )
小时 4 hours
小时 36 hours
（ ℃ ） 0 ( ℃ )
小时 3 hours
小时 25 hours
（ ℃ ） 5 ( ℃ )
小时 2 hours
小时 12 hours
（ ℃ ） 20 ( ℃ )
分钟 30 minutes
小时 6 hours
（ ℃ ） 30 ( ℃ )
分钟 20 minutes
小时 4 hours
（ ℃ ） 40 ( ℃ )
分钟 12 minutes
小时 2 hours
1) Drilling with Hilti te-76 electric drill system
2) Use a brush and blower to clear the holes, at least three times.
3) Use Hilti md2500 special injection glue gun to fill the glue, the first three shots of glue must be discarded
4) Glue from the bottom of the hole to the depth of about 2
5) Slowly screw in the rebar clockwise to ensure that it reaches the bottom of the hole
6) Check whether there is glue overflowing on the surface of the hole to ensure that the hole is full
7) According to the deep solidification technology system, the curing time is recommended to wait for the medicine to solidify. Do not bump or strike the steel bar during the period.
8) Complete, carry out subsequent construction, load loading
1. To undertake the following projects: Strengthening and strengthening of building structures: carbon fiber reinforcement of beams and columns, reinforcement of beam and column cross-sectional areas, reinforcement of steel bars, steel reinforcement, aramid cloth reinforcement, reinforcement of tunnel rings, reinforcement of steel bars, steel plates, Engineering constructions such as sticking carbon fiber cloth, repairing cracks, waterproofing leak repairs, steel structures, concrete cutting, bridge lifting, replacement of bearings, bridge repair and reinforcement, bridge reinforcement with carbon fiber cloth, bridge underpinning, etc.
碳纤维胶 、碳纤维胶、树脂、、碳纤维布、灌注胶、灌缝胶、环氧灌浆料、碳纤维板等——均为a级胶具体施工范围（1）植筋加固技术：梁，柱加大断面植筋，柱加牛腿，水平植筋。 2. Product sales: building structural glue, planting glue (both injection and bulk), carbon fiber glue , carbon fiber glue, resin, carbon fiber cloth, pouring glue, jointing glue, epoxy grout, carbon fiber board, etc.- All are a-grade glue. Specific construction scope (1) Reinforcement technology: beams and columns with enlarged cross-sections, columns with corbels, and horizontal reinforcement. The wall is thickened with knots and tendons. Structure plus layer stigma tie knot reinforcement. The beam body is extended with horizontal planting bars. Beams and plates cantilever horizontally plant tendons, columns are added to the beams, and vertical tendons are planted. Foundation, continuous wall planting. Reinforcement of precast beams. Buried parts of curtain wall, fixed mechanical equipment, etc. Anchorage of rock, brickwork, etc. (2) Steel-reinforcement technology: It is a method of strengthening the structural load-bearing capacity and deformation capacity by sticking steel plates to the surface of concrete members through building structural glue. Bonded steel reinforcement is a widely used and mature reinforcement method, and there are corresponding specifications. Features: It has the characteristics of bending resistance, tensile strength, shear resistance, compression resistance, etc .; Scope of application: It is suitable for strengthening of beams, slabs with positive and negative bending moments, and strengthening of the shear capacity of beams, which can directly improve the bearing capacity. Carbon fiber reinforced: It is a method of reinforcing carbon fiber material on the surface of concrete members by using supporting bonding materials. Features: Its characteristics are that it does not increase the external size and load of the structure, can enhance the bending resistance of the component, improve the shear resistance of the component, extend the service life, increase the load, and repair cracks. Scope of application: It is suitable for the strengthening of beams and slabs in bending capacity, the strengthening of columns, and the seismic strengthening of structures.
Tips: In order to avoid purchasing risks, it is recommended that you confirm the supplier's qualification and product quality before purchasing the product.