The high-quality fast grinder manufacturers are made of high-quality stainless steel and are equipped with national standard motors. They are mainly used in chemical materials, Chinese medicinal materials containing tree roots, branches and bulk materials, various low-oil content grains, grains and other hard, Brittle materials.
The high-quality fast grinder manufacturer is made of high-quality stainless steel and is equipped with national standard motors. It is mainly used for chemical materials, Chinese medicinal materials containing tree roots, branches and block materials, various low-oil content grains, grains, and other rigid materials. , Brittle materials.
This machine utilizes the relatively high-speed operation between the movable toothed plate and the fixed toothed plate, so that the object to be crushed can be crushed by the impact and friction of the toothed plate and the collision of materials with each other.The crushed material can be directly discharged from the grinding chamber and discharged through the discharge port. After the general material is crushed, it is collected in a cotton bag. The crushed material is collected in the bag, and the air comes out from the small holes of the bag. The fine powder is discharged, thereby achieving the effects of no waste and no pollution.The particle size is determined by replacing the screens with different mesh numbers.
The structure of this machine is simple, sturdy, and runs smoothly. The crushed material is fast and uniform, and the effect is good.This machine is all made of stainless steel. All the coggings inside the casing (grinding groove) are precision machined to achieve a smooth surface and easy cleaning. It changes the phenomenon that the inner wall of ordinary grinders is rough, easy to accumulate powder and difficult to clean. The production of medicines, chemicals, etc. can better meet the national standards and meet the health requirements of GMP
Features ofhigh-quality fast grinder manufacturers
1. The ultra-fine pulverizer uses the principle of airflow guidance to combine the advantages of traditional high-speed pulverizers, crushers and grinders, and it is the incarnation of three machines.
2. The average particle size of the ultrafine grinder is over 150 mesh, which is comparable to that of the grinder.
3. The ultra-fine crusher uses all stainless steel crushing tanks and blades to meet the requirements of Chinese medicine against iron and GMP.
4. The ultra-fine crusher uses a wide range of materials. Minerals, fibers, and slightly viscous substances (drying) can be crushed to extremely fine particle sizes, such as licorice, pearl, diabetes formula, umbilical, skin dressing, etc.
5. The ultrafine crusher is easy to operate, and the material can be extremely fine without repeated crushing.
6. The ultra-fine crusher can be used continuously, with powerful air-cooling device, no time limit.
7. The ultra-fine crusher does not need a screen, and there is very little residue, which is easy to clean.
8. The ultra-fine crusher zhi knife, small machete, and large machete are prepared in a variety of knife types, which can effectively reduce the unfavorable crushing factors caused by the differences in the nature of the materials, so they are used.
9. This machine is a small pulverizer, running water pulverizer and grinder.Small size, light weight, stable performance, easy operation, beautiful appearance, low loss (the loss part is just the blade)
Design and production of plastic machinery nets, ripping without permission will be investigated. Copyright (C) http://www.siamtlr.com , All rights reserved. The above information is provided by the enterprise itself, and the authenticity, accuracy and legality of the information content are the responsibility of the relevant enterprise. Plastic Machinery Network does not assume any responsibility for this. Tips: In order to avoid purchasing risks, it is recommended that you confirm the supplier's qualification and product quality before purchasing the product.