Vortex high pressure aeration pump
1. Case material: The fan is made of die-cast aluminum, which is the same aluminum material as Mercedes-Benz Wheel Yi. Compared to ordinary aluminum alloys, die-cast aluminum is stronger and more lightweight than iron-fan fans.
2. Motor performance: The fan uses a Taiwan motor, which is a wide-band, wide-voltage motor. It is included in: single-phase 110V / 230V industrial three-phase: 220/380/415 / 660V, etc., the motor frequency can be 45-75HZ frequency modulation, IP55 Protection class F insulation class.
3. Fan oil seal: The fan adopts German MERKEL oil seal, and German MERKEL (Merkel) material adopts fluorine rubber, which can withstand nearly -25 ° C to 300 ° C. Compared with normal oil seals, the temperature of the lip is higher than the temperature of the working medium by 20 to 50 ° C, and the performance is more stable, maintenance-free and longer life.
4. Fan bearings: The core components of the vacuum suction fan adopt German SKF and Japanese NSK brand bearings. The bearings can withstand a speed of nearly 280 degrees Celsius and a speed of 4,000 rpm. For domestic Luo shaft, human-centered bearings, stable performance, low noise, maintenance-free, longer life, can ensure longer fan operation.
1. Noise reduction: The motor runs directly, and the noise of high-pressure fans is improved by adding a noise reduction facility.
2. High reliability When the use situation changes, the machine can still run safely. Except for the impeller, the high-pressure blower has no other action, so its reliability is almost maintenance-free. The use of precision external bearings with good heat dissipation, so it has the following advantages: high compression ratio; low bearing operating temperature; long grease life.
3. Easy to install and complete. It can be installed and used at any time. It can be used for compressed air or vacuum. It can also be installed horizontally or vertically.
4. The oil-free and pollution-free impeller does not come into contact with any part when it rotates, and is free from lubrication, so it is guaranteed to be pollution-free.
5. High quality After 30 years of professional manufacturing experience, precision mechanical design plus careful motor testing with standard instruments, all parts can be used to achieve high quality requirements. Using standard ip54, F-class motors have high efficiency and few failures. There is a shaft seal division test between the blowers to prevent foreign matter from entering. At the same time, to ensure the functional effect, each blower is strictly tested before leaving the factory.
Vortex high pressure aeration pump
Scope of application:
1. Textile equipment: Turpu multi-stage fan, high-speed socks knitting machine; coating thickness control to ensure uniform thickness, moisture removal, drying, and spinning machine.
2. Plastic auxiliary machine and central feeding system: In the use of the casting machine, in order to ensure high-speed production and ensure that the casting film is uniform, the air knife on the cooling roller makes the film and the surface of the cooling roller form a thin air layer. The fan uniformly cools the film; it is also used for the real feeding, drying, dehumidifying and central feeding system of the injection molding machine.
3. Computer monitors, LCD monitors, printed circuit boards, and other products can be used in printed circuit board equipment such as high-pressure fans to clean, cut water, and dry.
4. Use in wire and cable equipment to remove moisture, oil, dryness, and static suppression, such as water removal for air conditioning precision copper pipes.
5, in the coating equipment can effectively control the thickness of the coating and ensure uniform thickness; you can dry, remove moisture, large area high temperature drying, coating thickness control; cut water drying after plating, metal degreasing and other metal surface treatment.
6. High-pressure fan is used for pneumatic conveying of cans; the use in beverage bottles, cans and various packaged foods such as cutting water and drying before coding or labeling food and beverage filling equipment.
7, printing equipment: screen printing machinery; UV glazing machine, printing ink within 1-5 seconds of instant drying.
8. Air treatment equipment that can be used for the collection, purification and recycling of toxic and harmful gases; gas detection equipment for the atmospheric environment.
9. Particularly suitable for cleaning equipment such as ultrasonic cleaning machines, PCB board cleaning dryers in the electronics industry, tunnel-type car washing machines (car washing machines), commercial dishwashers, glass washing machines and the like.
10. High-pressure fan can be used for aquaculture of aquatic surface, aeration, aeration grid and aeration system.
Tips: In order to avoid purchasing risks, it is recommended that you confirm the supplier's qualification and product quality before purchasing the product.