Lead battery separator production line equipment
PE separator can not only increase the capacity of the battery (low acid replacement and no saddle at the bottom of the battery tank), but also improve the cold start performance. It is especially suitable for increasing the separator's resistance to breakdown strength and oxidation resistance under the conditions of elevated temperature. Unit features: The whole set of equipment is divided into three independent units. 1. Sheet extrusion system; 2. Sheet pumping system; 3. Sheet slitting system.
Basic parameters of lead battery separator production line equipment :
Thickness range: 0.2-0.25mm
Width range: 810-1220mm (more widened according to demand)
Processing materials: PE, SiO2, filling oil, etc.
It uses high-quality medium-alkali and high-alkali ultra-fine glass fibers as raw materials and adopts wet forming process. It is made through beating, molding, drying, and winding processes. It has strong acid resistance, small pore size, high porosity, and high liquid absorption Features are key materials for manufacturing valve-regulated sealed lead-acid batteries.
The glass fiber separator is composed of a glass sheet with a diameter of 0.5-3 μm. It has good acid resistance, high porosity, small pore size, high liquid absorption, low impurity content, and low resistance. It is suitable for valve-regulated sealed lead-acid batteries, which absorbs the required electrolyte, retains the free passage of oxygen, and allows oxygen to be recombined into water on the negative plate through the separator. No need to add water for maintenance-free functions.
Agm partition uses:
Ultra-fine glass fiber separators are used for valve-regulated sealed lead-acid batteries. With the rapid expansion of the use of valve-regulated sealed lead-acid batteries, valve-regulated sealed lead-acid batteries are widely used in fields such as electronic communications, computer emergency power supplies, train lighting and signals, electric vehicles, motorcycles and toys.